For demonstration purposes the above animation shows 2 keypads used to control the MRG2 LEDs that are used in this painting. The actual painting comes with one keypad.

The Controller Keypad features eight buttons for selecting shows, onboard LEDs to indicate the current show, dimmer controls, and a master OFF switch. The OFF button and dimmer buttons are not functional in the interactive flash animation.

The lighting system consist of 12 MRG2 RGB LEDs made by Color Kinetics.

• Fits into a standard MR16 fixture
• Rated life is 100,000 hours
• Capable of producing 16 millioin colors
• High impact resistant
• UL listed

 

 

The shows are programmed on a computer and then downloaded to the storage playback module, shown to the right. The contoller keypad is used to trigger up to 8 shows. Simply assign 1 of 8 triggers to any of the wide variety of shows stored on the storage module and you then have a new set of shows to be activated with the keypad. The ColorPlay software and a computer is required to edit the triggers.

The storage module can store up to 16MBs of data which can be a lot more than 8 shows. It depends on the length of the shows. The iPlayer2 module is 7.5" L x 2.75" D x 1.25" H.

 

Initially, we at Light Energy Studio, will program the shows to your preferences or you can select existing shows from our library. If you would like to program your own shows we will provide you with the simple and easy to use software that you can use on your computer. The software is provided at an additional cost.

 

Note: No computer is needed to playback shows - only to edit the triggers, program, and download the shows to the iPlayer2. The Light Energy Painting arrives with preprogrammed shows ready for playback.

To the right is the power supply used to power the iPlayer2 module, contoller kepad, and the MRG2 LEDs and are connected with supplied cables. The power supply is located outside the painting frame and can be mounted to a wall or rest on the floor. Dimensions are: 8.5" L x 5.5" D x 3.5" H