![](https://lightenergystudio.com/wp-content/uploads/2024/07/dj-facade-page-title.png)
![](https://lightenergystudio.com/wp-content/uploads/2024/07/dj-facade-main-2024.jpg)
Shown above is a DJ Facade with an infinity mirror center frame with programmable LEDs and end panels with color changing LEDs and white translucent acrylic front surfaces. Option 3 lighting
For the DJ that demands an impressive DJ Facade that will boost your DJ image and visual presentation, using a variety of stimulating lighting effects, our portable and durable facades are the right choice. Quality built facades with aluminum frames that will stand up to the stress that constant transporting can cause.
We have a line of DJ Facades, and Front boards that are lightweight and sturdy. Most come with 1/4″ thick white translucent acrylic front surfaces. In the case of our infinity mirror facade it uses both acrylic mirror and acrylic see-thru mirror.
Features:
- Aluminum frames, 1 1/2″ deep
- A variety of powder coat finishes available for frames
- More sturdy and durable over wood frames
- Center and end frames are easily pivoted with hinges to open or close facade
- High grade 1/4″ white translucent acrylic for optimum effects
- Custom sizes available
- Variety of lighting options available
- 1/8″ white ABS plastic back panel
Our Standard DJ Facade Sizes:
Center Panel: 48″W x 48″H
End Panels: 24″ W x 48″H (2)
Center Panel: 60″W x 48″H
End Panels: 24″ W x 48″H (2)
Center Panel: 72″W x 48″H
End Panels: 24″ W x 48″H (2)
![](https://lightenergystudio.com/wp-content/uploads/2024/07/lighting-opt1b.jpg)
Lighting Option 1: Color Changing LED Flex Strips
Very bright and comes with two controllers with one remote.
Can do color-fade, color-snap, white strobe and fixed color and more.
User can dim the lights.
User can adjust the speed of color change on the color-fade, color snap or strobe mode.
This would be the most economical lighting option.
You have the option of having the colors for the end panels be different than the center panel
![DJ Facade Lighting Option 2](https://lightenergystudio.com/wp-content/uploads/2024/07/lighting-opt2-revised.jpg)
Lighting Option 2: Color-Changing Chasing LED Effects in Center Panel and Non-Chasing LEDs in the end panels
Note: Chasing LED Flex strips are in the center panel only but can also be used in the end panels for additional cost.
This would be the next most economical and effective lighting option and has 99 effects, mostly chasing colors and is far more dramatic than option 1. User is limited to the preset shows and the color combinations that the controller provides. For example; if you wanted the center panel to have red and yellow lights, this option may or may not provide that. With option 3 the user can created any color combinations
End Panel lighting: Color-changing LEDs, NO chasing
Very bright and comes with a controller with a remote.
Can do color-fade, color-snap, white strobe and fixed color.
User can dim the lights on fixed mode
User can adjust the speed of color change on the color-fade, color snap or strobe mode.
![DJ Facade Lighting Option 3](https://lightenergystudio.com/wp-content/uploads/2024/07/lighting-opt3.jpg)
Lighting Option 3: Color-Changing, Fully Programmable Chasing LED Effects in Center Panel and Non-Chasing LEDs in the end panels.
Note: Our programmable LEDs provide the most versatiliy for our DJ Facades since the effects/shows can be programmed with any color combination desired.
For example; if you wanted the center panel to have red and yellow lights or blue and green then this option can provide that.
End Panel lighting: Color-changing LEDs, NO chasing
Very bright and comes with a controller with a remote.
Can do color-fade, color-snap, white strobe and fixed color.
User can dim the lights on fixed mode
User can adjust the speed of color change on the color-fade, color snap or strobe mode.
![Rear View of DJ Facade](https://lightenergystudio.com/wp-content/uploads/2024/07/basic-dj-facade-rear-view.jpg)
For our Basic DJ Facade we use white ABS plastic for the back panels as white reflects more light back onto the white acrylic front surface.
Black ABS is available but is not recommended for our Basic DJ Fasade for this reason.
This dj facade is for Lighting Options 1, 2 and 3
![DJ Facade Front View Lights Off](https://lightenergystudio.com/wp-content/uploads/2024/07/dj-facade-openned.jpg)
Front view of DJ Facade with LEDs off.
Our Basic DJ Facades with client logos installed in center panel.
![DJ Facade Client 1](https://lightenergystudio.com/wp-content/uploads/2024/07/pendleton-whisky-logo-facade.jpg)
![DJ Facade Client 2](https://lightenergystudio.com/wp-content/uploads/2024/07/blue-cross.jpg)
Watch Videos of Lighting Options 2 and 3
Video showing the DJ Facade Option 2 Lighting
Video showing the DJ Facade Option 2 Lighting
Video showing the DJ Facade Option 3 Lighting
Video showing the DJ Facade Option 3 Lighting
![](https://lightenergystudio.com/wp-content/uploads/2024/07/mtv-dj-facade.jpg)
Our DJ Facade used at an MTV show
If you would like to get a quote for any of our DJ Facades call or email us.